Skoda KAMIQ Rear parking sensors

Theme : Skoda KAMIQ Rear parking sensors 

item: 658054630B

The parking sensors are the simple solution for correct reversing. They reduce the risk of colliding with people or objects that are out of the driver‘s line of sight (low walls, railings, or even small children).

Rear parking sensors:

- are fitted recessed into the rear bumper,

- do not spoil the vehicle‘s aesthetics in any way,

- are activated when reverse gear is engaged,

- using ultrasonic waves, the sensors calculate the distance between the vehicle and the potential obstruction,

- inform the driver about how much space there is behind the vehicle using an acoustic signal through the speaker or as a display on the infotainment screen.

A description of how the rear parking sensors work, detailed information on how to use them and a visual representation of the area monitored can be found in the Owner‘s Manual – see the „Parking aid“ section in the „Assist systems“ chapter.

These sensors are fitted into the rear bumper in exactly the same way as the series production version of this product; the fitting procedure can be found in the ŠKODA Repair Manual. Instructions for feeding through and routing the wiring for the rear sensors in the vehicle interior can be found in the fitting instructions for the rear sensors 658 054 630B.

Content of set

Wiring harness for the sensor connection on the rear bumper, wiring harness for the rear parking sensors for the vehicle interior, control unit, retainer for the control unit, speaker, sensor (x 4), spacer for the sensor (x 4), sensors brackets (x 4), 7.5 A MINI fuse, protection connector, foam-rubber piece, connecting materials, fitting instructions.

Restrictions

The set is intended for vehicles produced from CW 30/2020. In case of change of control unit it is possible to use the set for vehicles produced from start of production. For vehicles produced - from start of production until CW 28/2019 use control unit 5QA 919 283C, - from CW 28/2019 to CW 30/2020 use control unit 5QA 919 283E, - from CW 30/2020 current control unit is already a part of the set.

Placement In the rear bumper.

Fit: Skoda Kamiq ( 2019 - )